An important use of GLOBE VALVE is to regulate or throttle fluid flow none to full capacity. They may be operated efficiently with the stem in any position from wide open to fully closed. The change in direction of fluid flow through the valve produces increased resistance & considerable pressure drop in globe valves.

SERVICE RECOMMENDATIONS
• Flow regulation or throttling
• Frequent operation
• Increased flow resistance
• Positive shut-off when closed

Disc & seats in GLOBE VALVES can be repaired or replaced without removing the valve body from the line. The selection of the most suitable discs/seats design is the key to good performance in throttling service Following types of Discs are available in "SCENT" GLOBE VALVES

•Teflon of composition discs
• Full way or spherical type disc
• Plug type disc
• Needle type disc

PART NAME	MATERIAL SPECIFICATION
Body	ASTM A 216 GR. WCB	ASTM A 351 GR CF8 / CF8M
Bonnet	ASTM A 216 GR. WCB	ASTM A 351 GR CF8 / CF8M
Disc	AISI 410	ASTM A 351 GR CF8 / CF8M
Seal Rint	AISI 410	Integral With Body
Back Seat	AISI 410	AISI 304/316
Stem	AISI 410	AISI 304/316
Gland	AISI 410	AISI 304/316
Gland Flange	Carbon Steel	AISI 304/316
Gland Packing	Metallic Reinforced Grafted Asbestos	Metallic Reinforced Grafted Asbestos
Gasket	Spiral Wound Metallic Gasket	Spiral Wound Metallic Gasket
Yoke Sleeve	All. Bronze	AISI 304/316
Yoke Nut	Cast Iron	Cast Iron
Hand Wheel   Bolts/. Nuts	ASTM A 193 GR. B7/ ASTM A 194 GR. 2H	ASTM A 193 GR. B7/ASTM A 194 GR. 2H
I-BOLT	ASTM A 193 GR. B7	ASTM A 193 GR. B7

SIZE	15	20	25	40	50	65	80	100	150	200	250	300
A	152	178	203	229	267	292	318	356	445	559	622	711
B	215	230	265	280	432	483	508	559	710	755	850	975
ØW	100	100	125	140	160	180	200	250	350	450	500	550